Two-agent two-machine flowshop scheduling with learning effects to minimize the total completion time

We study a two-agent scheduling problem in a two-machine permutation flowshop with learning effects. The objective is to minimize the total completion time of the jobs from one agent, given that the maximum tardiness of the jobs from the other agent cannot exceed a bound. We provide a branch-and-bound algorithm for the problem. In addition, we present several genetic algorithms to obtain near-optimal solutions. Computational results indicate that the algorithms perform well in either solving the problem or efficiently generating near-optimal solutions.     

基于三维胞元空间的MA双向并行路由算法

针对传统移动代理(MA)在监测无线传感器网络(WSNs)的感兴趣信息时产生的延迟较大和能耗较多问题,提出了基于三维胞元空间的MA双向并行(3D-BPMA)路由算法.3D-BPMA将MA与传统的客户/服务器(c/S)模式相结合,在胞元内利用C/S模式搜集信息,在单层胞元系统和路由器与路由器之间采用MA双向并行的策略进行传输.仿真结果表明:3D-BPMA与LCF,DSG-MIP算法相比减少了平均响应时间和网络平均能耗,提高了MA发送率.     

Photopolymerization synthesis of polyacrylic acid dispersant with methoxysilicon end groups and its application in a nano‐SiO2 aqueous system

In order to improve the dispersity and stability of the nano‐SiO₂ aqueous system with high solid content, a kind of polyacrylic acid dispersant with methoxysilicon end groups (KH590‐PAA) was synthesized by photopolymerization of acrylic acid (AA) initiated with (3‐mercaptopropyl)trimethoxysilane (KH590). After adding KH590‐PAA into the nano‐SiO₂ aqueous dispersion system (20 wt% solid content), the viscosity and the curing time of the system were measured with a rotational viscometer and the inverted bottle method. Moreover, the dispersion mechanism of KH590‐PAA for the nano‐SiO₂ aqueous system was researched by measuring the adsorption capacity, the particle size and the zeta potential of the nanoparticles with a conductivity meter, dynamic light scattering, SEM and TEM, respectively. The results showed that the methoxysilicon groups in KH590‐PAA could react with hydroxyl groups on the surface of nano‐SiO₂ in the process of stirring, which enhanced the adsorption capacity of the dispersant and then increased the surface charge of the particles. Therefore, electrostatic repulsion and steric hindrance effects between the SiO₂ nanoparticles could be further enhanced by adding the KH590‐PAA dispersant, and then the nano‐SiO₂ aqueous system exhibited better dispersity and stability. Besides, the dispersion properties of SiO₂ nanoparticles in water were closely related to the addition amount and the molecular weight of the KH590‐PAA dispersant. © 2018 Society of Chemical Industry     

Preparation of porous SiC-Al2O3 ceramics via gelcasting utilising a shrinkable pore-forming agent and oxidised coarse-grained SiC

By utilising soaked millet as a shrinkable pore-forming agent, porous silicon carbide-alumina (SiC-Al₂O₃) ceramics were prepared via gelcasting. The fabrication of SiC-Al₂O₃ ceramics based on oxidised and unoxidised coarse-grained SiC was also studied. The water swelling, drying shrinkage, and low-temperature carbonisation of the millet were investigated. We found that the shrinkage of the soaked millet was greater than that of gel body during drying, which left large gaps that prevented shrinkage stresses from destroying the gel body. Low-temperature carbonisation of the millet should be performed slowly at 220–240?°C because its expansion rate increases to 45% at 250?°C, resulting in the cracking of samples. At a constant sintering temperature, the flexural strength of the SiC-Al₂O₃ ceramics prepared with SiC powders oxidised at 1000?°C was the highest, indicating that oxidised powders can successfully decrease the required sintering temperature and improve the flexural strength of composite ceramics. Based on our optimised process, porous SiC-Al₂O₃ ceramics were sintered at 1500?°C for 2?h. When their skeletons were fully developed, their pore sizes were in the range of 1.5–2?mm. Their porosity and flexural strength were 60.2–65.1% and 8.3–10.5?MPa, respectively.     

HSDN‐GRA: A hybrid software‐defined networking‐based geographic routing protocol with multi‐agent approach

We propose in this paper a Hybrid Software‐Defined Networking‐based Geographical Routing Protocol (HSDN‐GRA) with a clustering approach. It takes into account three different criteria to select the best relay to send data: (1) the contact duration between vehicles, (2) the available load of each vehicle, (3) and the log of encountered communication errors embedded in each cluster head. The multi‐criteria strategy allows the selection of the most reliable vehicles by avoiding communication problems and ensuring connection availability. Once the hybrid control plane has found out the next eligible neighbor, the data plane will be in charge of dividing and sending data. To validate our approach, HSDN‐GRA has been modeled and implemented in JADE, a multi‐agent platform, to be compared to other multi‐agent based protocols. Simulation results show that HSDN‐GRA achieves good performance with respect to the average routing overhead, the packet drop rate, and the throughput.     

纸基底印刷无芯片RFID湿度传感器* .txt

摘要：提出了一种基于纸基底的喷墨印刷无芯片RFID湿度传感器，通过遗传算法与射频仿真软件HFSS相结合，对常规开口环谐振器结构进行分布式加载，得到目标频率为245 GHz的谐振特性良好的传感器模型；采用DMP3000型材料打印机，在不同纸基底上喷墨印刷银墨水制作传感器，以纸张本身的吸水性实现湿度传感；研究不同纸基底对湿度传感器感湿灵敏度和恢复度的影响。结果表明，柯达相纸传感器的灵敏度最高，高湿灵敏度可达到8 MHz%RH，双铜纸湿度传感器恢复度高且恢复时间短，仅为2 min；两种基底湿度传感器皆有较好的一致性、中长期稳定性，且湿敏特性在20℃～30℃范围内受温度影响较小。对纸基湿度传感器的感湿机理进行了分析，纸主要成分纤维素表面的羟基与吸附的水分子作用形成氢键，改变了基底的介电参数，传感器的湿敏特性与纸的成分和结构有关。 .txt     

A油区清垢剂与缓蚀剂的优选分析

随着油田开发进程的深入,注水驱油早已成为最为常见的开采方式之一。实践表明,不论是从水体的配伍性还是经济性的角度来看,经过多重技术处理的采出污水都是回注水体的最佳选择。但是由于作业废水和废置液包含化学成分较多,常会因其间的相互反应而腐蚀堵塞管线等设备。因此,本文以A油区为例,基于其实际的生产状况,根据采出污水结垢趋势和腐蚀原因,进行清垢剂与缓蚀剂的优选,以期为实际生产提供一点理论参考。     

马来酸三乙醇胺酯对水泥水化的影响

为克服三乙醇胺早强剂对水泥抗折强度和后期强度的影响,合成了马来酸三乙醇胺酯,并通过背散射电子成像(BSE)和BET分析,研究了马来酸三乙醇胺酯对水泥水化程度、C-S-H含量和水泥水化28 d分形维数的影响。结果表明:马来酸三乙醇胺酯可促进水泥水化尤其是水泥中硅酸盐相的水化;复掺马来酸三乙醇胺酯和聚羧酸减水剂,可显著提高水泥水化产物中C-S-H的含量;三乙醇胺降低了水泥石28 d的分形维数,马来酸三乙醇胺酯单掺及与聚羧酸减水剂复掺则使水泥石28 d的分形维数提高。由此可见,马来酸三乙醇胺酯作为增强型水泥早强剂具有广阔的应用前景。     

Paper mill sludge as a renewable substrate for the production of acetone-butanol-ethanol using Clostridium sporogenes NCIM 2337

In the present study, pre-treated paper mill sludge (PMS) was evaluated extensively as a substrate for production of acetone-butanol-ethanol using Clostridium sporogenes NCIM 2337. The PMS was subjected to three types of pre-treatment methods namely alkali, mechanical, and thermal treatment and was analyzed by SEM. The pre-treatment of PMS by alkali was observed to be more effective over the other pre-treatment methods. The alkali pre-treated sludge was then made to undergo fermentation, which showed the conventional process of acidogenesis followed by solventogenesis. The acetone, butanol, and ethanol concentration for 15% alkali pre-treated PMS was estimated to be maximum.     

液态CO2辅助喷涂发泡聚氨酯硬泡的研究

采用三组分聚氨酯硬泡喷涂高压发泡机,以HCFO-1233zd(E)或HFO-1336mzz(Z)为主体发泡剂,将液态CO2作为第三组分添加,制备了喷涂聚氨酯硬泡。对比了不同含量CO2喷涂发泡制得的聚氨酯泡沫制品的性能。结果表明,添加液态CO2会使泡沫的乳白时间缩短,凝胶时间和固化时间延迟;添加适量液态CO2可以提高泡沫制品的压缩强度,能降低泡沫的闭孔率;添加少量液态CO2会使泡沫的泡孔分布更加均匀,泡沫更加细腻,可以提高HFO类发泡体系泡沫的综合性能,尤其能提高泡沫超低温环境下的绝热性能。